Hot dip galvanized silk manufacturers said that galvanized wire processing into optimal Z low carbon steel cable, the selection of optimal Z low carbon steel, drawing forming, pickling rust removal, high temperature annealing, hot gold plating. It is made by processing and cooling processes. Galvanized wire is divided into hot galvanized wire and cold galvanized wire (electric galvanized wire). There will inevitably be some problems in the process of galvanizing. When this problem occurs, how to solve it is more important to prevent this series of problems from happening. What does the galvanized silk factory tell you to pay attention to in the process of galvanized silk?
Hot dip galvanized silk manufacturers said that the duration of galvanized silk protection has a great relationship with the thickness of the coating. Generally, during relatively dry periods and indoor use, the thickness of galvanized layer is only 6-12μm, but in the J-end environment, the thickness of galvanized layer should reach 20μm, and the Z height should be 50μm. Therefore, in the selection of galvanized thickness, we must consider the impact of the environment.
Galvanized wire galvanized layer passivation, can be made into bright, antique passivation film, greatly improve the decorative performance of the buckle plate. There are many kinds of galvanized solution, which can be divided into fluoride plating solution and no fluoride plating solution according to its characteristics. Galvanized solution has good dispersion ability and application ability, smooth plating, simple operation, wide range of application, medium and long term selection in the production process. However, electroplating solution contains strong toxicity, so the discharge of gas in the plating process is very harmful to the health of workers. Waste water should be treated strictly before discharge.
Hot dip galvanized silk manufacturers said that the appearance of the deposited layer before galvanized silk can partially remove surface masks, surface debris and other defects through existing technology. Excess foam is formed by the flow of soap and soap fat surfactant into the tank. The rate at which the intermediate foam is produced is harmless. A large number of small homogeneous particles in the tank can stabilize the foam layer and remove the surface active substance with activated carbon fossilization. It is an effective measure to destabilize the foam through filtration. Other measures should also be taken to minimize the inflow of surfactant. The inflow of organic matter can significantly reduce the plating rate, and the chemical formula is conducive to high deposition rates.
Hot dip galvanized silk factory to share the application method of galvanized silk:
Galvanized iron wire should reasonably choose the traction position of the product. To prevent horizontal movement of the product, minimize the traction position. In order to prevent the goods from turning over, the traction position can be properly high.
The main use methods of galvanized wire are eight, resale, cross, sawtooth, reverse and so on.
When galvanizing wire is reinforced, single or double galvanizing wire travels between the two bundles of merchandise and the car. Pull galvanized wire so that each loose piece is as versatile as possible. After the rest of the rope, twist with a mallet, the rest of the tail toward the car.
